THIẾT BỊ ĐO ĐIỆN ÁP & ĐIỆN TRỞ ĐA KÊNH - HIOKI SW1002

Mã : SW1002 | Thương hiệu : Hioki

Giá tham khảo : Liên hệVui lòng liên hệ để có giá tốt nhất

Brochure: Measuring Instruments for the Battery Industry

Brochure: BATTERY TESTER Series

Catalog: SWITCH MAINFRAME SW1001, SW1002

Switch Mainframe SW1001/SW1002,Multiplexer Module SW9001/SW9002

Lead-acid Battery Handbook

SWITCH MAINFRAME SW1002

SWITCH MAINFRAME SW1001,SW1002

SWITCH MAINFRAME SW1002

SW1001 Freeware

SW1001 SW1002 USB Driver

LabVIEW driver for SWITCH MAINFRAME SW1001 SW1002

SWITCH MAINFRAME SW1001,SW1002

SWITCH MAINFRAME SW1002 SW1002

Packed with Features to Assure Accuracy in Multi-channel Battery Testing

The SW1002 is a switch mainframe for housing the SW9001 or SW9002 Multiplexer Module to deliver quick, multi-channel battery testing. Connect up to 2 battery testing instruments to test OCV measurement, internal resistance measurement, and external potential measurement of battery cells.

Key Features

Switch between voltmeter and battery tester while testing
SW1002:Â max.Â 264 channelsÂ (2-wire) toÂ max.Â 72 channelsÂ (4-terminal pair)
Circuit-design-friendly for impedance measurements that minimize errors between channels (Effect: 0.01% f.s. [*1])
For OCV measurement, internal resistance measurement, and external potential measurement of battery cells
Measure battery modules up to 60 V DC

*1:For BT4560 100 mÎ© range, R measurements, and a measurement frequency of 1 kHz

Model No. (Order Code)

SW1002	12 slots

Note: Multiplexer Modules not included with the Switch Mainframe SW1001/SW1002. Modules must be purchased separately.

Chuyên cung cấp thiết bị đo lường, thử nghiệm, dụng cụ cầm tay,...

Basic specifications

Slots	12 slots
Supported modules	MULTIPLEXER MODULE SW9001 (2-wire/4-wire) MULTIPLEXER MODULE SW9002 (4-terminal pair)
Connectible instruments	Max. 2 units 2-wire Ã— 1 + 4-wire Ã— 1, or 2-wire Ã— 1 + 4-terminal pair Ã— 1
Max. input voltage	60 V DC (Cannot connect to battery packs in excess of 60 V DC), 30 V AC rms, 42.4 V peak, Maximum rated voltage to ground: 60 V DC
Communication I/F	LAN, USB, RS-232C (for host, for measurement instruments)
Functions	Channel switching, wiring method, scan function, communication command transmission, channel delay, shield switching
Power supply	100 to 240 V AC / 30 VA (50/60 Hz)
Dimensions and mass	430 mm (16.93 in) W Ã— 132 mm (5.20 in) H Ã— 420 mm (16.54 in) D, 6.0 kg (211.6 oz)
Included accessories	Power cord Ã—1, instruction manual Ã—1, usage precautions Ã—1, USB driver CD Ã—1

Basic specifications for MULTIPLEXER MODULE

ã€€	SW9001	SW9002
Wiring method	2-wire or 4-wire	4-terminal pair (6-wire) or 2-wire
No. of channels	22 channels (2-wire) / 11 channels (4-wire)	6 channels (4-terminal pair) / 6 channels (2-wire)
Contact method	Armature relays
Channel switching time	11 ms (excluding measurement time)
Max. allowable voltage	60 V DC, 30 V AC rms, 42.4 V peak
Max. allowable current	1 A DC, 1 A AC rms	1 A DC, 1 A AC rms (Sense), 2 A DC, 2 A AC rms (Source, Return)
Max. allowable power	30 W (resistive load)
Maximum rated voltage to ground	60 V DC
Dimensions and mass	25.5 mm (1.00 in) W Ã— 110 mm (4.33 in) H Ã— 257 mm (10.12 in) D, 210 g (7.4 oz)	25.5 mm (1.00 in) W Ã— 110 mm (4.33 in) H Ã— 257 mm (10.12 in) D, 196 g (6.9 oz)
Included accessories	Instruction manual Ã—1