THIẾT BỊ PHÂN TÍCH CHẤT LƯỢNG ĐIỆN - HIOKI PQ3198

Mã : PQ3198/60 KIT,PQ3198/100 KIT,PQ3198/600 KIT,PQ3198/6000 KIT,PQ3198/6000-10in KIT,undefined | Thương hiệu : Hioki

Giá tham khảo : Liên hệVui lòng liên hệ để có giá tốt nhất

Selection Guide Power Quality Analyzers / Power Loggers

Brochure: POWER QUALITY ANALYZER PQ3198, PQ3100

GENNECT ONE SF4000

Certificate of Conformity IEC 61000-4-30 Edition 3

Voltage, Current, and Power Measurement for Cycle-controlled Loads, Phase-controlled Loads, and Inverters

Guidebook for Power Quality Measurement

POWER QUALITY ANALYZER PQ3198, POWER QUALITY ANALYZER KIT PQ3198-92, PQ3198-94

POWER QUALITY ANALYZER PQ3198

GENNECT One

PQ ONE

POWER QUALITY ANALYZER PQ3198 PQ3198-92 PQ3198-94

POWER QUALITY ANALYZER PQ3198

Investigate Power Characteristics and Analyze the Causes of Problems

Hioki portable power meters and analyzers are best in class power measuring instruments for measuring single to three-phase lines with a high degree of precision and accuracy. The new and improved PQ3198 is a power quality analyzer for monitoring and recording power supply anomalies, allowing their causes to be quickly investigated, and also for assessing power supply problems such as voltage drops, flicker, harmonics, and other electrical issues. New features include the ability to drive current sensors straight from the PQA and enhanced recording capabilities.

Key Features

Verify power problems in accordance with the IEC61000-4-30 Edition 3 Class A standard
High accuracy and continuous gapless recording
(V: Â±0.1% of nominal voltage, A: Â±0.1% rdg. Â±0.1% f.s., W: Â±0.2% rdg. Â±0.1% f.s.)
Broadband voltage range lets you measure even high-order harmonic (supraharmonic) components of up to 80 kHz
Maximum 6000 V peak transient voltage up to 700 kHz
Measure up to 6000 A AC
Two systems of power measurement and efficiency calculation for (ch 1, ch 2, ch 3) and ch 4
Make simple measurements of inverters with 40 to 70 Hz fundamental frequency and max. 20 kHz carrier frequency
Easily create reports with bundled PQ ONE application softwareÂ
Optional GPS BOX for synchronizing multiple devices

Model No. (Order Code)

PQ3198/60 KIT	60A kit (PQ3198 w/ 4 x CT7126, 3 x L1021-02, Z4003, 4 x 9804-01, 4 x 9804-02, PQ3100/98 H-Case)
PQ3198/100 KIT	100A kit (PQ3198 w/ 4 x CT7131, 3 x L1021-02, Z4003, 4 x 9804-01, 4 x 9804-02, PQ3100/98 H-Case)
PQ3198/600 KIT	600A kit (PQ3198 w/ 4 x CT7136, 3 x L1021-02, Z4003, 4 x 9804-01, 4 x 9804-02, PQ3100/98 H-Case)
PQ3198/6000 KIT	6000A kit (PQ3198 w/ 4 x CT7045, 3 x L1021-02, Z4003, 4 x 9804-01, 4 x 9804-02, PQ3100/98 H-Case)
PQ3198/6000-10in KIT	6000A kit (PQ3198 w/ 4 x CT7046, 3 x L1021-02, Z4003, 4 x 9804-01, 4 x 9804-02, PQ3100/98 H-Case)

Note: An optional current sensor is necessary to measure current or power parameters. Select from Value Kits for added savings.

Chuyên cung cấp thiết bị đo lường, thử nghiệm, dụng cụ cầm tay,...

Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)

Measurement line type	Single-phase 2-wire, Single-phase 3-wire, Three-phase 3-wire or Three-phase 4-wire plus one extra input channel for voltage, current, power measurement (AC or DC measurement)
Voltage ranges	Voltage measurement: 600.00 V rms Transient measurement 6.0000 kV peak
Current ranges	500.00 mA to 5.0000 kA AC (depends on current sensor in use)
Power ranges	300.00 W to 3.0000 MW (determined automatically based on voltage and current range in use)
Basic accuracy	Voltage: Â±0.1% of nominal voltage Current: Â±0.1 % rdg. Â±0.1 % f.s. + current sensor accuracy Active power: Â±0.2 % rdg. Â±0.1 % f.s. + current sensor accuracy
Measurement items	1. Transient voltage : 2 MHz sampling 2. Frequency cycle : Calculated as one cycle, 40 to 70 Hz 3. Voltage (1/2) RMS: one cycle calculation refreshed every half cycle Current (1/2) RMS: half-cycle calculation 4. Voltage swell, Voltage dips, Voltage interruption 5. Inrush current 6. Voltage waveform comparison 7. Instantaneous flicker value: As per IEC61000-4-15 8. 200 ms frequency: Calculated as 10 or 12 cycles,40 to 70 Hz 9. 10 sec frequency: Calculated as the whole-cycle time during the specified 10 s period, 40 to 70 Hz 10. Voltage waveform peak, Current waveform peak 11. Voltage, Current, Active power, Apparent power, Reactive power, Active energy, Reactive energy, Power factor, Displacement power factor, Voltage unbalance factor, Current unbalance factor, and efficiency 12. High-order harmonic* component (voltage/ current): 2 kHz to 80 kHz *Supraharmonic 13. Harmonic/ Harmonic phase angle (voltage/ current), Harmonic power: 0th to 50 th orders 14. Harmonic voltage-current phase angle: 1th to 50 th orders 15. Total harmonic distortion factor (voltage/ current) 16. Inter harmonic (voltage/ current): 0.5 th to 49.5 th order 17. K Factor (multiplication factor) 18. IEC Flicker, Î” V10 Flicker 19. Mains signaling voltage
Record	Repeated ON: 1 year, Maximum recording event: 9999 Ã— 366 days (up to 9999 events per day) Repeated off: 35 days, maximum recording event: 9999 events
Interfaces	SD/SDHC memory card, LAN (HTTP server function / FTP function), USB2.0 (for communication)
Display	6.5-inch TFT color LCD (640 Ã— 480 dots)
Power supply	AC adapter Z1002 (100 V to 240 V AC, 50/60 Hz, rated current 1.7 A), Battery Pack Z1003 (Continuous use: 180 minutes, Charging time: Max. 5 hr 30 m with AC adapter)
Dimensions and mass	300 mm (11.81 in)W Ã— 211 mm (8.31 in)H Ã— 68 mm (2.68 in)D, 2.6 kg (91.7 oz) (including Battery Pack Z1003)
Included accessories	Instruction manual Ã—1, Measurement guide Ã—1, Voltage Cord L1000 Ã—1 set (Red/ Yellow/ Blue/ Gray each 1, Black 4, 3m (9.84ft) length, Alligator clip Ã—8), Spiral tube x20, Color clip, AC Adapter Z1002 Ã—1, Strap Ã—1, USB cable (1 m 3.28 ft length) Ã—1, Battery pack Z1003 Ã—1, SD Memory Card 2GB Z4001 Ã—1, Application software (PQ ONE) Ã—1