THIẾT BỊ GHI DỮ LIỆU - HIOKI 8423

Mã : 8423 | Thương hiệu : Hioki

Giá tham khảo : Liên hệVui lòng liên hệ để có giá tốt nhất

Brochures: Data Loggers Selection Guide (LR8450, LR8450-01, LR8410-20, LR8431-20, 8423)

MEMORY HiLOGGER 8423

LOGGER UTILITY SF1000

MEMORY HiLOGGER 8423

Communication commands manual and LabVIEW 2019 driver for LR8450, LR8416, LR8410, LR8400, LR8401, LR8402 and 8423

WIRELESS LOGGING STATION LR8410 MEMORY HiLOGGER LR8400 LR8401 LR8402 8423 LabVIEW 2011 driver and Communication command manual

Version Upgrade for MEMORY HiLOGGER 8423

MEMORY HiLOGGER 8423

600-channel Data Logger with 10ms Sampling

Hioki Memory HiLoggers are high-speed data loggers for recording multiple chanels of voltage, temperature, resistance, humidity, rotation, and pulse signals, providing complete isolation within channel sets. The 8423 with optional input modules log data at 10ms speeds across up to 600 simultaneously, and is configurable and controllable using a PC.

Key Features

Capture data with 15 to a maximum of 600 channels
Send data to the PC in real time
Isolated to sustain up to 600 V between modules and earth
USB 2.0, LAN 100BASE-TX, store to 1GB PC Card
Simultaneous fast- and low-speed sampling allows for media storage space efficiency

Model No. (Order Code)

8423	Main unit only

Note: 8423 cannot operate alone. You must install one or more optional input modules in the unit. Thermocouples are not provided by Hioki, and must be purchased from a separate vendor.

Chuyên cung cấp thiết bị đo lường, thử nghiệm, dụng cụ cầm tay,...

Basic specifications

Accuracy guaranteed: 1 year

No. of connectable units	Maximum 8 units (total 120 channels), Bundle 8 modules together to achieve a 120-channel system, Bundle 5 systems together to enable a maximum of 600 channels of simultaneous recording
Measurement parameters Model 8948	[No. of channels] 15 analog channels, isolated scanning method input (2 terminals: M3 screw type) [Voltage measurement range] Â±150 mV to Â±100 V, 1-5V, Max. resolution 5 ÂµV, Max. allowable input: 100 VDC, between channels: 200 VDC, to earth: 600 VAC/DC [Temperature range] -200ËšC to 2000ËšC (depend on the sensor), thermocouples (K, J, E, T, N, R, S, B, W), Max. resolution 0.01ËšC
Measurement parameters Model 8949	[No. of channels] 15 analog channels, isolated scanning method input (4 terminals: push-button type) (not isolated between channels at resistance temperature sensor & humidity sensor) [Voltage measurement range] Â±150 mV to Â±60 V, 1-5V, Max. resolution 5 ÂµV, Max. allowable input: 60 VDC, between channels: 120 VDC, to earth: 600 VAC/DC [Temperature range] âˆ’200ËšC to 2000ËšC (depend on the sensor), thermocouples (K, J, E, T, N, R, S, B, W), Max. resolution 0.01ËšC [Resistance temperature sensor range] âˆ’200ËšC to 800ËšC, (Pt 100, JPt 100), Max. resolution 0.01ËšC [Humidity] 5.0 to 95.0% rh, (use with optional sensor 9701), resolution 0.1% rh
Measurement parameters Model 8996	[No. of channels] 15 channels, digital/pulse input (2 terminals: M3 screw type, CH1-5, CH6-10, CH11-15 are common GND, No-voltage â€˜aâ€™ contact, open collector or voltage input) [Totalized pulses] 0 to 1000M pulse, Max. resolution 1 pulse [Rotation count] 0 to 5000/n (r/s), Resolution 1/n (r/s) *n = pulses per rotation (1 to 1,000) [Digital input] Record ON/OFF digital signal per interval [Max. allowable input] 50 VDC, between channels: 33 VACrms or 70 VDC, to earth: 600 VAC/DC, (Upper limit voltage that does not cause damage when applied between CH1-5, CH6-10, CH11-15 each channel and chassis, and between each UNITs)
Recording intervals	10 ms to 1 hr, 19 ranges (5s to 1hr when combined with humidity measurement), Dual sampling: Recording intervals can be specified for every input module (high-speed and low-speed)
Function	Measurement data are saved to the CF Card in real time, Trigger function, Digital filter (Input unit), Alarm output (use with the Alarm unit 8997), Data acquisition is controlled by the PC data acquisition program, FTP server function, HTTP server function
Interface	LAN: supports 100Base-TX, USB: Ver 2.0, mini-B receptacle, CF card slot
Power supply	Using the AC adapter 9418-15 (100 to 240 V, 50/60 Hz), 55 VA Max. (include AC adapter), 20 VA Max. (main unit only) (when connected with 8 units), External DC Power: 9.6 V to 15.6 VDC, 20 VA Max. (when connected with 8 units) (Please contact HIOKI for connection cord)
Dimensions and mass	67 mm (2.64 in) W Ã— 133 mm (5.24 in) H Ã— 125 mm (4.92 in) D, 600 g (21.2 oz) (main unit 8423 only)
Included accessories	Quick start manual Ã— 1, Instruction manual Ã— 1, AC adapter 9418-15 Ã— 1, USB cable Ã— 1, CD-R (data collection software â€œLogger Utilityâ€) Ã— 1, Connector cover Ã— 1, Ferrite clamp Ã— 1, Connection plate Ã— 1