Thiết Bị Ghi Và Phân Tích Tín Hiệu Điện - HIOKI MR8847A

Mã : MR8847-51,MR8847-52,MR8847-53 | Thương hiệu : Hioki

Giá tham khảo : Liên hệVui lòng liên hệ để có giá tốt nhất

Brochure: CURRENT SENSOR, PROBE Series

Catalog: HIGH ACCURACY / WIDEBAND CURRENT SENSOR Series CT686x, CT687x, CT684x

Brochure: MEMORY HiCORDER MR8847A

Catalog: iPad App for Memory HiCorder HMR Terminal

Brochure: Waveform Generator System U8793,MR8847A

MEMORY HiCORDER MR8847-53

MEMORY HiCORDER MR8847-52

MEMORY HiCORDER MR8847-51

MEMORY HiCORDER MR8847A (MR8847-51,MR8847-52,MR8847-53)

MEMORY HiCORDER MR8847-51,MR8847-52,MR8847-53

MEMORY HiCORDER MR8847-51,MR8847-52,MR8847-53 ï¼ˆWith DC Power Unit 9784ï¼‰

GENNECT One

MEMORY HiCORDER MR8847A

MR6000 Viewer

MEMORY HiCORDER & MEMORY HiLOGGER Application Disk (incl. Command manual)

MEMORY HiCORDER / MEMORY HiLOGGER Wave Viewer (Wv)

MATLABscript for MEMORY HiCORDERs (8860-50(51) 8861-50(51) MR8827 MR8847(A) MR8875 MR8740 MR8741 MR6000 MR8740T)

MEMORY HiCORDER Model MR8827 MR8847 MR8847A MR8740 MR8741 8826 8835 8835-01 8841 8842 8847 8855 LabVIEW 2011 driver

MEMORY HiCORDER MR8847-51,MR8847-52,MR8847-53

MEMORY HiCORDER MR8847-01, MR8847-02, MR8847-03, MR8847-51, MR8847-52, MR8847-53 MR8847-01, MR8847-02, MR8847-03, MR8847-51, MR8847-52, MR8847-53

High-speed 20 MS/s (*1), 32-channel, Fully Isolated Memory Recorder for On-site Jobs and R&D

Hioki Memory HiCorders are high-speed waveform monitoring and recording devices that can simultaneously measure multiple physical phenomena such as voltage, current, temperature, vibration, acceleration and rotation due to complete isolation between channels and from each channel to the ground. The MR8847A delivers 20 MS/s sampling (*1), 32 isolated channels, and max. 1000 V direct input, all housed in a tough and field-ready body to properly respond to the most challenging work sites from transformer substations to railway maintenance yards to paper and steel mills.

How to use the Hioki MR8847A Memory HiCorder to Generate Signals While Monitoring Waveforms

The Hioki MR8847A is function generator, arbitrary waveform generator, and waveform recorder all in a single device. Easily observe waveforms while changing the signal amplitude or frequency, programming a variety of waveforms to output in the desired order, and adjusting other testing conditions.

3D View

Key Features

Supports a wide variety of measurements with a total of 17 plug-in modules
Generate and record with a single unit
Direct 1000 V high voltage input testing
High-speed sampling up to 20MS/s (*1) with fully isolated inputs
32 analog channels + 16 logic ch to 20 analog channels + 64 logic ch
High-speed sampling with waveform judgement function
Soil-resistant construction strong against adverse working environments
Big buttons coated to withstand industrial oil and residue
Drop-in paper loading and one-touch setup, along with high-speed 50mm/s printing

*1:When U8975, U8977, U8978 are installed, max. sampling speed is 10 MS/s.

Model No. (Order Code)

MR8847-51	Max. 32ch, 64MW memory, main unit only
MR8847-52	Max. 32ch, 256MW memory, main unit only
MR8847-53	Max. 32ch, 512MW memory, main unit only

Note: Main unit MR8847-51/ -52/ -53 cannot operate alone. You must install one or more optional input modules in the unit.

Chuyên cung cấp thiết bị đo lường, thử nghiệm, dụng cụ cầm tay,...

Basic specifications

Accuracy guaranteed: 1 year

Max. Number of channels	32 ch analog + 16 ch logic, or 20 ch analog + 64 ch logic (when used with built-in logic input + plug-in Logic Unit 8973 Ã— 3)
Number of slots	8 slots (Max. 8), [Limitation on number of slots] when using the 3CH Current Unit U8977: Max. 3, when using the Current Unit 8971: Max. 4, when using the Logic Unit 8973: Max. 3
Number of logic channels	16 ch logic (logic probe terminal GND share a common GND with chassis) Built-in logic input not available when using DVM Unit MR8990 on slots 1 or 2. [Limitation on using built-in logic input] (with logic measurement ON) â€¢ Measurement resolution on slots 1 and 2 is limited up to 12 bits â€¢ Cannot use Frequency Unit 8970 on slots 1 or 2.
Measurement ranges (20 div full-scale)	[Analog unit 8966]: 5 mV/div to 20 V/div, 12 ranges, resolution : 1/100 of range (using 12-bit A/D) [High Voltage Unit U8974]: 200 mV/div to 50 V/div, 8 ranges, resolution : 1/1600 of range (using 16-bit A/D)
Max. allowable input	400 V DC (using the 8966), 1000 V DC (using the U8974)
Frequency characteristics	DC to 5 MHz (-3 dB, using the 8966), DC to 100 kHz (using the U8794)
Time axis (Memory function)	5 Âµs to 5 min/div (100 samples/div) 26 ranges, External sampling (100 samples/div, or free setting), Time axis zoom: x2 to x10 in 3 stages, compression: 1/2 to 1/200 000 in 16 stages
Measurement functions	MEMORY (high-speed recording), RECORDER (real-time recording), X-Y RECORDER (X-Y real-time recording), FFT
Other functions	Waveform judgment (at Memory or FFT function)
Memory capacity	MR8847-51: Total 64 M-words (Memory expansion: none) 32 MW/ch (using 2 Analog channels), to 2 MW/ch (using 32 Analog channels) MR8847-52: Total 256 M-words (Memory expansion: none) 128 MW/ch (using 2 Analog channels), to 8 MW/ch (using 32 Analog channels) MR8847-53: Total 512 M-words (Memory expansion: none) 256 MW/ch (using 2 Analog channels), to 16 MW/ch (using 32 Analog channels)
Removable storage	CF card slot (standard) Ã—1 (up to 2GB, FAT, or FAT-32 format), SSD (128 GB, optional), USB memory stick (USB 2.0)
Printing	216 mm (8.50 in) Ã— 30 m (98.43 ft), thermal paper roll, Recording speed : Max. 50 mm (1.97 in)/s
Display	10.4 inch TFT color LCD (SVGA, 800 Ã— 600 dots)
Displayable languages	English, Japanese, Korean, Chinese
External interfaces	[LAN] 100BASE-TX (FTP server, HTTP server), [USB] USB2.0 compliant, series A receptacle Ã—1, series B receptacle Ã—1, (File transfer internal drive/CF card to PC, or remote control from PC)
Power supply	100 to 240 V AC, 50/60 Hz (130 VA max., when using printer: 220 VA max.), 10 to 28 V DC (when using the optional factory-installed DC Power Unit 9784)
Dimensions and mass	351 mm (13.82 in) W Ã— 261 mm (10.28 in) H Ã— 140 mm (5.51 in) D, 7.6 kg (268.1 oz) (main unit only)
Included accessories	Instruction manual Ã—1, Measurement guide Ã—1, Application disk (Wave viewer Wv, Communication commands table) Ã—1, Power cord Ã—1, Input cord label Ã—1, USB cable Ã—1, Printer paper Ã—1, Roll paper attachment Ã—2, Ferrite clamp Ã—1