Chào mừng bạn đến với website của chúng tôi

Hioki flat bandwidth current probes are best-in-class current sensors for use with Memory HiCorders and high performance oscilloscopes. The CT6710 is a 3-range, high-sensitivity current probe that offers a wide DC to 50 MHz bandwidth and 200 μA to 30 A input, letting your capture signals across an expansive current range, from steady state to transient currents, when developing switching power supplies, inverters, and motor controllers.  

Use with an instrument with a high input impedance of 1 MO or higher.

Key Features

  • 3 ranges in a single probe - 30 A, 5 A, 0.5 A.  Observe a wide current range from micro currents to 30 A.
  • Wide band: DC to 50 MHz (-3 dB)
  • High S/N ratio and 10 times output rate: Observe waveforms at 100 μA/div at oscilloscope maximum voltage sensitivity setting of 1 mV/div
  • Directly connect to an oscilloscope’s BNC input terminal (*1)
  • *1:Connecting the probe's metal BNC terminal to a Memory HiCorder’s plastic BNC terminal may distort or damage the plastic terminal. To avoid damage, please connect and disconnect the probe cable straight to the BNC terminal of the waveform monitoring equipment.

Model No. (Order Code)

CT6710 From 200μA, 50MHz bandwidth
Note: If power cannot be supplied from the Memory HiCorder, the optional Power Supply 3269 is required. Please pay attention to offset drift during continuous, long-term measurement.
Chuyên cung cấp thiết bị đo lường, thử nghiệm, dụng cụ cầm tay,...
You need to Login Like Cancel
Your review will be posted publicly on the web
You need to Login Comment
Reviews Page 0 / 5 stars, based on 0 reviews
(0)
(0)
(0)
(0)
(0)

Sản phẩm đã xem

Đối tác

Hotline
Quý khách có nhu cầu
vui lòng liên hệ