CLAMP ON PROBE 9010-50

Mã : 9010-50 | Thương hiệu : Hioki

Giá tham khảo : Liên hệVui lòng liên hệ để có giá tốt nhất

CLAMP ON PROBE 9010-50,9018-50

CLAMP ON PROBE 9010-50

CLAMP ON PROBE 9010-50,9018-50

CLAMP ON PROBE 9010, 9010-01, 9010-02, 9010-10, 9010-50 9010, 9010-01, 9010-02, 9010-10, 9010-50

Simply Connect to a Tester or Recorder to Easily Measure Large Currents

Hioki current sensors are best-in-class devices for accurately capturing a wide range of current levels. The 9010-50 is a multi-range 500A AC voltage output clamp sensor for capturing waveforms with DMMs. Measure AC current on live power lines without needing to cut the wire.

CAT III 600 V

Key Features

Economical clamp sensors for waveform recording with Memory HiCorders
Choose from up to six general-purpose ranges

Model No. (Order Code)

9010-50	BNC output terminal

For 50/60Hz commercial power lines; no external power supply required.

Chuyên cung cấp thiết bị đo lường, thử nghiệm, dụng cụ cầm tay,...

Basic specifications

Accuracy guaranteed: 1 year

Rated current	10 A to 500 A AC, 6 ranges
Accuracy	Â±2 % rdg. Â±1 % f.s. (45 to 66 Hz)
Frequency characteristics	Add to amplitude accuracy for frequencies from 40 to 1 kHz: Â± 6 % rdg. (at 10 A and 20 A range) Â± 3 % rdg. (for 50 A range and above)
Output rate	0.2 V AC f.s. (f.s. = setting rage) (Connect to a voltage input device providing a high input impedance of 1 MÎ©)
Max. allowable input	150 A rms continuous (10/20/50 A ranges) 400 A rms continuous (100/200 A ranges) 650 A rms continuous (500 A range) (For 40 Hz to 100 Hz: 100 %, and for 100 Hz to 1 kHz: within 50 % of derating)
Max. rated voltage to earth	600 Vrms (50/60 Hz, CAT III)
Core diameter	Ï†46 mm (1.81 in)
Dimensions and mass	78 mm (3.07 in)W Ã— 188 mm (7.40 in)H Ã— 35 mm (1.38 in)D, 420 g (14.8 oz), cord length: 3 m (9.84 ft)
Included accessories	Instruction manual Ã—1