BATTERY INSULATION TESTER BT5525

Mã : BT5525 | Thương hiệu : Hioki

Giá tham khảo : Liên hệVui lòng liên hệ để có giá tốt nhất

Brochure: BATTERY INSULATION TESTER BT5525

Insulation Resistance Measurement Handbook

Sequence Maker, a command send/receive add-in for Excel

Upgrading of BT5525

BT5525 Sample application

BATTERY INSULATION TESTER BT5525

BATTERY INSULATION TESTER BT5525 BT5525

Detect contamination that could cause defects.
Improve battery cell productivity through high-speed testing.

Product Video

The BT5525 can prevent the shipment of batteries with latent defects that could lead to fires.

This is introduction to the functions of the new "BATTERY INSULATION TESTER BT5525" for battery production lines. The BDD function, which monitors minute voltages and currents and detects foreign substances mixed in the production process, and a convenient PC application that allows you to view waveforms, will be explained while actually measuring!

3D View

Key Features

Ideal for battery production lines
BDD function for detecting minuscule short-circuits caused by contamination before batteries are shipped
Stable insulation resistance testing even in noisy environments
High cost performance thanks to accessible pricing, high-speed testing, and compact footprint
Contact check function reduces the number of false negatives caused by equipment issues

Model No. (Order Code)

BT5525

Chuyên cung cấp thiết bị đo lường, thử nghiệm, dụng cụ cầm tay,...

Specifications

Accuracy guaranteed for 1 year

Main functions	Insulation resistance test Break Down Detect function (BDD) Contact check function
Output specifications	Output voltage : 25 V to 500 V, Setting resolution 1 V Charging current (Current limit function) : 50 ÂµA to 50 mA123, Minimum setting resolution 10 Î¼A Short-circuit current : 60 mA or less Discharge current : 40 mA or greater 1: Constraints involving the output generator will result in an error, making measurement impossible, if a capacitive load of approximately 50 Î¼F or greater is connected while using a current limit setting of 5.1 mA or greater. 2: When using a current limit setting of 5.1 mA or greater, measurement will be forcibly stopped if the output voltage is not at least 20 V at 200 ms after the start of measurement. Measurement will be possible 1 s after forcibly stopped. 3: If the set current limit value is from 5.1 mA to 50.0 mA, the current will be limited to 5 mA after the output voltage reaches the set voltage.
Measurement specifications	Resistance value display range : 0.050 Mâ„¦ to 9999 Mâ„¦ Resistance range : 2 Mâ„¦, 20 Mâ„¦, 200 Mâ„¦, 2000 Mâ„¦, AUTO
Basic specifications	Â±1.5ï¼… rdg.Â±2 dgt. 25 V â‰¤ V < 100 V [0.05 MÎ© to 2 MÎ©], 100 V â‰¤ V â‰¤ 500 V [0.2 MÎ© to 20 MÎ©]
Time specifications	Test time : 0.050 s to 999.999 s, OFF Comparator delay time : 0.001 s to 999.999 s, AUTO Display update speed : 1 PLC Sampling time : 1 PLC to 100 PLC
Memory functions	Panel save function : Saves up to 15 sets of measurement conditions Measured value memory function : Saves up to 999 measured values in the instrument's internal memory
Judgment functions	Test modes : Continuous test, PASS STOP, FAIL STOP Comparator function : UPPER_FAIL : Measured value > upper limit value PASS : Upper limit value â‰¥ measured value â‰¥ lower limit value LOWER_FAIL : Measured value < lower limit value
Various functions	Break Down Detect function (BDD) : Detecting minuscule insulation defects caused by contamination Contact check function : 2-terminal capacitance measurement method Automatic data output function : Automatic output of measurement results via communication interface after completion of test Command monitor function : Screen display of commands being sent and received External I/O monitor function : Screen display of output signal ON/OFF and input signal status Analog output function : Converts measured values to 0 to 4 V DC and outputs
Interfaces	USB, LAN, RS-232C, EXT. I/O
Power supply	100 V to 240 V AC
Power consumption	Approx. 20 VA4 4: Power supply conditions are 220 V supply voltage, 50, 60 Hz supply frequency, 200 V test voltage, 2 mA current limit, and load (1 GÎ© resistor and 0.1 Î¼F capacitor connected in parallel).
Maximum rated power	100 VA
Dimensions and mass	Approx. 215 mm (8.46 in) W Ã— 80 mm (3.15 in) H Ã— 306.5 mm (12.07 in) D (excluding protruding parts), Approx. 2.8 kg (98.8 oz)
Included accessories	Power cord Ã—1, EXT. I/O male connector Ã—1, EXT. I/O connector cover Ã—1, EXT. I/O interlock cancellation jig Ã—1, Startup Guide Ã—1